The Victors

Really depends on the crack. But since it's clean through the door, you should start with wood glue. Lots of it, and work it into the crack. I'd also clamp the door from both sides using woodworking pipe clamps. Then if there are still gaps after you glue/clamp, go in with epoxy wood filler**

Posted on September 23, 2026 at 02:46:15 PM by Brad

Back to the board

Thread:

• Home maintenance question - By caddis September 23, 2026 at 01:00:33 PM
  • Really depends on the crack. But since it's clean through the door, you should start with wood glue. Lots of it, and work it into the crack. I'd also clamp the door from both sides using woodworking pipe clamps. Then if there are still gaps after you glue/clamp, go in with epoxy wood filler** - By Brad September 23, 2026 at 02:46:15 PM
  • I don't know, but we had a door refinishing company fix all of our doors a few years ago. May be worth sending one a picture and see what they recommend* - By MaizeInTx September 23, 2026 at 01:23:53 PM
  • A few additional thoughts - By Craig September 23, 2026 at 01:22:35 PM
  • You could try putting some wood filler into the gap.* - By mjhollen September 23, 2026 at 01:12:43 PM
  • I've seen that fixed with elastomer caulk which can expand and contract with the crack. Easy to fill and paint over* - By wingedvictory September 23, 2026 at 01:09:47 PM
    • If painting is desired, be sure to get a caulk that says it is paintable. Silicone caulk, for example, is not paintable* - By ajs September 23, 2026 at 01:13:43 PM

Log in to reply.